2 component epoxy resin

2 component epoxy resin

Product introduction:
Two-component Epoxy Resin Adhesive is room temperature curing type, transparent bee-shaped, it can be cured at low temperature or room temperature, and the curing speed is moderate; after curing, the bonding part has high bonding strength, impact resistance, vibration resistance, good hardness, and has Good toughness; the cured product has good acid and alkali resistance, good moisture-proof, waterproof, oil-proof and dust-proof performance, and is resistant to humidity and heat and atmospheric aging; the cured product has good electrical and physical properties such as good insulation, compressive strength, and high bonding strength.It is a kind of Wood Glue and also a Water Based Adhesives

2 component epoxy resin use precautions
1. This product will gradually solidify after mixing, and its viscosity will gradually increase.
2. The more the amount of glue mixed together, the faster the reaction will be, the faster the curing speed will be, and it may be accompanied by a small amount of heat. The time will also be shortened, and the mixed glue should be used up in a short time as much as possible.
3. Usable time: It refers to the time when the viscosity of 100g mixed glue doubles at 25°C. After it is not operable, the glue must not be used.
4. A very small number of people will have mild skin allergies and mild itching when they are in contact with the glue for a long time. It is recommended to wear protective gloves when using it. If it sticks to the skin, please wipe it off with acetone or alcohol, and clean it with detergent.
5. Please try a small amount before using it in large quantities. Experts remind you to master the use skills of the product to avoid mistakes.